Gel Stain & Topcoat - 946ml

The Gel Stain & Top Coat is an oil-based coating available in 4 gorgeous colours. Double Espresso, Ebony, Greystone and Patina. It has similar characteristics to our Stain and Finishing Oil (SFO), however, with Gel Stain, it can be applied to virtually any surface with no prep (after cleaning of course) to a surface that has been previously finished, scratched, painted etc.  

Quick facts:

• This is a Brush-On and leave it product, NOT a wipe-on or wipe back oil.

• Use a natural bristle brush or a roller to apply.

• Dries to the touch in approximately 4 hours and can be re-coated at that time (always test for tackiness prior to recoating, if still tacky wait another couple of hours and re-assess)

• Has a thicker gel-like consistency – each colour varies. When stirred it becomes less thick.

• Long open time and self-leveling.

• One Coat looks like a stain. Subsequent coats become more opaque, except for Patina which will remain transparent as it contains no pigment.

• Satin Finish.

 IDEAL SURFACES

• Laminate, Lacquered, previously painted or coated surfaces.

• Damaged or Scratched surfaces

• Almost a no-prep product, just clean and remove any wax or grease. No sanding or de-glossing required to apply this.

• Extremely durable. Excellent for Flooring and heavy use kitchen table tops etc.

• Works on Bare Wood surfaces for a beautiful satin finish.

 CLEAN UP AND CURE TIME

• Gel Stain is Oil Based

• Mineral Spirits for clean up

• Dries to the touch in approximately 4 hours

• Cures in 5 Days

COVERAGE - 80 - 120 sq. ft.

How can you decide which one to use and when?

If you have a raw wood that has an even surface and lovely grain, we would lean towards using our Stain and Finishing Oil. If you have a sealed, varnished, lacquered or painted wood surface, or a surface that is damaged or scratched we would lean towards the Gel Stain & Top Coat.